Common Reasons Why Automatic Balanced Doors Need Repair

When your automatic balanced doors have problems, they may be due to several factors. These factors include an unbalanced door, damaged rollers, or inclement weather. If you cannot determine the cause of these problems, consult with Dawson doors New York professionals.

Unbalanced Doors Can Strip Drive Gears

When your automatic garage door needs to be fixed, it may result from an unbalanced door. The door may have a broken spring or a motor that is not in phase. If the motor is out of phase, the drive sprocket turns clockwise but does not stop at the down position. This will eventually cause the drive sprocket to strip.

Damaged Rollers

An off-track garage door can cause a lot of frustration, damage to your property, and possibly even serious injuries. Luckily, this issue can be easily fixed. To begin, disengage the opener. Then, check the rollers for damage. The problem may appear as a squeaking or grinding noise. Damaged rollers or hinges typically cause this. If you hear these noises, the rollers may need to be replaced. If your rollers are metal, you may need to lubricate them. However, some lubricants can be damaging to nylon and plastic rollers. A professional can advise you on the proper lubricant. They will also be able to repair or replace rollers during routine maintenance visits.

Permanent Obstructions Blocking The Heel Edge of the Door

If you have a door that slides open and closes automatically, there’s a problem with the heel edge. A permanent obstruction in this area prevents the door from swinging fully open. The door frame needs to be recessed enough so the door can swing its heel edge in without hitting the wall. If it is more than 1 inch recessed, a pocket must be created in the wall material to support the door’s weight.

Inadequate Space

When installing automatic balanced doors in a building, the space required for installation is critical. The door must be able to swing fully open without interfering with the ceiling. For example, the soffit ceiling must be close enough to the interior door opening. In addition, the door needs adequate space for the pull handle to rotate in and out of the frame.

Automatic doors are legal requirements in many buildings. Moreover, they are essential for accessibility if the building is open to the public. These doors provide many benefits, including the ability to swing open and close safely in adverse weather conditions. In addition to offering familiar benefits, automatic balanced doors require minimal space.

Damaged Trolleys

The mechanism may need repair if the door opens and closes partially or fully. For example, a damaged trolley could cause the door to reverse while closing or stop while opening. If you suspect this is the case, examine the door parts to ensure they are in good condition. If you find damage, reconnect the trolley using the wall control or remote transmitter. You may need to raise the door arm to make the connection. Damaged trolleys on automatic balanced doors are often difficult to detect. First, check the door springs. If they are loose or bent, the springs will prevent the door from becoming out of balance and may not operate properly. 

Post